Owning an ATV is not a walk in the park because the machine is very delicate and needs your attention. When your ATV has any damages, it will cost you so much to repair. That gives you a reason to carry out regular maintenance to avoid damages. However, there are several ways you can fix your ATV on your own. Let us get to see how to repair damages on your ATV properly.
Clean Your ATVs Air Filters
As you ride, the ATV takes in air. The air contains debris and specks of dust. For the engine to work correctly, it needs good airflow. Accumulation of dust and debris on the air filters will cause clogging. Clogged air filters will interfere with the airflow, which will affect your engine’s performance and longevity. To resolve the damage caused by a clogged air filter, you will have to clean the air filters. You can easily overlook this, but maintaining your air filters is vital. Regularly clean your air filters, and after a while, change the air filters. The time needed for you to change the air filters depends on the manufacturer’s instructions. Failure to do so will cause severe damages, which you cannot repair on your own.
Change the Differential Oil
Changing your differential oil is essential, and when you forget, it results in severe damages. Oil is critical, and it works by lubricating the internal parts and removing any dust particles on them. When you ride, your ATV encounters sand, dust, and debris, and the oil absorbs them to leave the internal parts clean. It is a good practice to change your oil every season. The user manual explains well how often you need to change the differential oil. If you have a coolster 150cc engine, you know how much it costs to get a new machine; you can avoid this by repairing any damages and changing your oil to prevent significant damages.
Get Your ATV Out of Water
Your ATV can get damaged when stuck in the water. When water gets into the engine, it causes oil contaminations and increases the buildup of dirt in the machine. Unless you are washing your ATV, do not allow water to get close to it. Even when washing, be careful not to make big splashes to get the water to the exhaust, engine, or air filters. Once water gets into your ATV, the first thing to do is turn it off and get it out of water. Removing your ATV from the water will prevent water from getting further and causing more damages. Do not do things hastily because you will cause more damages. Shake it off and ensure you remove all the water that has gotten inside the machine.
Grease the Zerk
Zerk points are the connections to movable parts, and when you fail to grease them, your ATV gets damaged. They rely on the grease to function correctly. Failure to lubricate the zerk points results in severe damages that will cost you so much to repair. Once you notice some weird sounds coming from the movable parts, it indicates some damages. You can repair that by greasing the zerk points regularly. After long rides, it is a good thing always to lubricate the pivot points. Do not wait until your ATV starts complaining. Ignoring greasing will lead to significant damages that will make you have to replace some parts or spend a lot of time in the repair shops. Remember, ATV parts are costly, and you would never want to go through the replacement costs.
Conclusion
All-Terrain Vehicles are exceptionally delicate, and minor mishandling can cause severe damages. The term all-terrain does not mean you can ride it anywhere. Be careful not to ride in water or muddy places because this will cause severe damages. It is effortless to ignore the maintenance practices of an ATV, but remember lack of maintenance causes costly damages. Above are some ways you can repair minor damages on your own. However, when the damages are significant, make a point to consult a professional mechanic. If you want to enjoy riding your ATV for years, make an effort to take good care of it.
